GSM Booster installation is very simple. Just follow the simple installation steps provided. Whichever product you purchase, the installation is the same for all products.
Follow these simple steps:
Step 1: Set the outdoor antenna at the place where you have the best signal (as high as possible; direct it to the location of the operator’s base station).
Step 2: Use the cable to connect the outdoor antenna and the repeater.
Step 3: Connect the indoor whip omni ceiling or wall antenna directly to the repeater.
Step 4: Plug into the power supply. The repeater should work immediately, giving you, 5 bars of mobile signal!
Installation Tips:
If the present “ground” mobile signal is 1-2 bars, check how many bars you have in a higher location. Go to the roof and see if there is little change. We recommended placing the antenna higher (such as 3-5 meters) as demonstrated in the photo below.
Important!:
Never plug the power supply in first. You must confirm that the antenna and cable are connected well first, otherwise the repeater may be damaged.
Minimal and maximal cable length (in meters) from outdoor antenna to the repeater:
| 100 sq. m. repeater | Min 8 / Max 20 |
| 150 sq. m. repeater | Min 8 / Max 25 |
| 300 sq. m. repeater | Min 8 / Max 25 |
| 600 sq. m. repeater | Min 8 / Max 30 |
| 1000 sq. m. repeater | Min 8 / Max 30 |
| 1500 sq. m. repeater | Min 8 / Max 60 |
Minimal and maximal able length (in meters) from repeater to indoor antenna:
| 100 sq. m. repeater | Min 3 / Max 10 |
| 150 sq. m. repeater | Min 3 / Max 15 |
| 300 sq. m. repeater | Min 3 / Max 15 |
| 600 sq. m. repeater | Min 3 / Max 30 |
| 1000 sq. m. repeater | Min 3 / Max 30 |
| 1500 sq. m. repeater | Min 3 / Max 60 |
